KunLun Magnetostrictive probe is Designed based on magnetostrictive principle. 

Technical Parameters:
 

1. Measuring range:0.3~4m（can customize according to user’s request） 
2. Safety Barrier input voltage: DC12V/40mA 
3. Communication protocol: Modbus RS485   Baud rate:2400BPS  
4. Transfer distance: 1200m 
5. Measuring accuracy:+/-1mm 
6. Repetition: 0.3mm 
7. Resolution:  0.1mm 
8. Temperature measuring number: 1 ~ 5
9. Temperature measuring range:-40°C ~ 125°C
10. Temperature Precision:±0.5°C
11. Temperature Resolution:0.0625°C
12. Protective Grade/Explosion-proof label: IP67/Exia II CT6 
13. Nominal working pressure: 0~0.6MPa 0~1.6MPa 0~2.5MPa 
14. Working medium density:0.4~1.3g/cm3 
15. The material of the probe and the Electronic Storehouse: 316L stainless steel probe 
16. The probe is used for exactly measuring tanks and it had been applied in the fields of gas station, chemical industry, foodstuff and pharmacy. 

Applied liquid products

1. Gasoline
2.  Diesel 
3. Kerosene
4. Ethanol Gasoline
5. Bio Diesel
6. Water
7. Other approved light oil products

 
Data measured

1. Product level
2. Water level
3. Temperature
4. Product inventory
5. Empty capacity (Order capacity)

 
Features

1. Transfer probe data to console in real time, including product level, water level,temperature
2. 5 points temperature sensors offer precision measurement as the basis of temperature compensation and leak detection
3. Digital signal transmit have remarkable highlights than traditional analog signals,especially on high anti-interruption ability, enhance long distance communication as 500m, and higher security.
4. Leak detection ability support 0.38Liter/Hour, and 0.76Liter/Hour, static and dynamic leak detection connects with console. This programmable Leak Detection can be set detect by daily,weekly, monthly or annually.

The probe length means the length from the bottom to the top under the electronic part, please see the graph as follows: